LUXMAN L-595A Limited Pure Class A Integrated Amplifier 95th Anniversary 100V

Design/Exterior

The front panel has a two-tone color/hairline finish that revives the image of the hit model L-570 series of yesteryear using today's metal processing technology.

Direct selection type aluminum hairline rectangular input switch that allows you to switch inputs intuitively and provides a small but reliable operating feel.

A high-precision, direct-read volume knob that illuminates the volume level with an LED installed in a large opening.

A luxurious rosewood-colored wooden cabinet made of 13mm thick MDF + natural wood veneer with a beautiful gloss finish.

The brand logo is deeply carved in inked cursive, and the red word LIMITED indicates that this is a limited edition product.

Electric circuit/function

Compatible with ODNF-u with greatly improved high-frequency distortion characteristics Pure class A 30W + 30W (8Ω) rated output with 3-stage Darlington 3-parallel push-pull configuration

High inertia power supply that combines a high regulation power transformer and an LR independent 80,000μF large capacity block capacitor.

The output stage of the preamplifier circuit is equipped with a discrete buffer circuit that improves the driving force to the power amplifier block.

Equipped with the new LECUA1000 electronically controlled attenuator with integrated 88-step amplifier circuit for smooth volume adjustment.

A high damping factor of 370 is achieved by large speaker relays and low impedance up to the speaker terminals.

Beeline construction that configures the input audio signal with the optimal shortest route to the speaker output

The joint board that connects the amplifier circuit and input/output terminals uses a peel-coated board that eliminates the resist that adversely affects sound quality.

Board wiring uses a round pattern to ensure smooth current transmission in consideration of the flow of delicate music signals.

Built-in MM/MC compatible phono amplifier circuit allows you to enjoy high-grade analog record playback without purchasing a dedicated phono amplifier.

A volume-linked loudness function that matches the auditory characteristics of icefish, and a separate function that enables the addition of a power amplifier and coexistence with an AV system.

*LECUA is an abbreviation for LUXMAN Electric Controlled Ultimate Attenuator.

Mechanism/attached equipment

Independent construction loopless chassis structure that shuts out increases in ground impedance due to chassis current

Attaching a shield plate made of copper-plated steel plate to protect small signal blocks such as preamplifier circuits from external noise

LINE-1 is equipped with copper alloy RCA terminals that have conductivity equivalent to copper and hardness comparable to brass.

Gradient cast iron insulator legs eliminate unnecessary external vibrations and firmly support the weight of the main unit.

Comes with a high-grade aluminum remote control RA-17A that can also operate compatible CD/SACD players.

Includes high-grade power cable JPA-15000 exclusively for top-end models.

Rated output 30W+30W(8Ω), 60W+60W(4Ω)

Input, separate input/output 4 line systems, 1 phono system (MM/MC switching), 2 balanced lines, 1 separate input/output system

Speaker output A, B2 system (AB simultaneous output possible)

Amplifier circuit, output configuration ODNF-u, bipolar/3 parallel push-pull

Input sensitivity/input impedance PHONO(MM): 2.5mV / 47kΩ, PHONO(MC): 0.3mV / 100Ω, LINE: 180mV / 47kΩ

Total harmonic distortion rate 0.007% or less (1kHz/8Ω), 0.06% or less (20Hz?20kHz/8Ω)

S/N ratio, frequency characteristics LINE: 105dB or more, 20Hz to 100kHz (+0, -3.0dB)

Attached equipment [Front panel] Power switch, input selector switch (LINE1-4/BAL-1,2/MM/MC),

Volume, headphone jack, speaker selector (A/B), tone control (BASS/TREBLE),

LR balance, remote control receiver, line straight, loudness, separate / (operable only with remote control)

mute, subsonic, monaural

[Rear panel] Input/output terminal, ground terminal, balanced phase switch, AC inlet

Power consumption 310W (Electrical Appliance and Material Safety Law), 230W (when no input is applied), 0.4W (when in standby)

Maximum external dimensions, mass 454 (W) x 186 (H) x 462 (including 19 front knobs and 36 rear terminals) (D) mm, 27.7 kg (main body)

Accessories Remote control (RA-17A), power cable (JPA-15000: with polarity mark)